Find batteries, charging equipment and compatible working systems for your aircraft.
Controller-battery charging: see the DJI 100W USB-C Power Adapter (UK) for compatible USB-C equipment and the WB37 Battery Charging Hub (USB-C) for removable WB37 batteries. Follow the hub and controller power-supply requirements. These accessories do not charge Agras aircraft flight batteries.
46 Ah flight battery for two- or four-battery T200 operation.
Use the DB2400 battery configuration specified for your T200 or FlyCart 200. Confirm battery quantity and the matching charger and cooling equipment when requesting a quote.
DJI compatibility reference ↗
41 Ah battery family documented for T100 and T70P.
Official DJI DB2160 / DB2212 family reference. Confirm the exact supplied battery revision.
For T100 dual-battery spraying or lifting, use two matching batteries of the approved type. Select charging leads and equipment for the DB2160 configuration.
DJI compatibility reference ↗€3,269.34 incl. VAT
€2,658.00 excl. VAT
41 Ah pack used by T100S; also listed as a regional pack variant in current T100/T70P specifications.
Official DJI DB2160 / DB2212 family reference. Confirm the exact supplied battery revision.
Select the DB2212 version specified for your aircraft. Check the supplied battery label and matching charging equipment before use. Dual-battery aircraft configurations require matching packs.
DJI compatibility reference ↗€3,269.34 incl. VAT
€2,658.00 excl. VAT
Included at this price: 1 × DJI DB2212 flight battery. Aircraft and charging equipment are sold separately. Select the DB2212 pack specified for your aircraft and regional configuration.
Choose the documented battery option for compatible Agras aircraft without treating the higher-capacity DB2160 as an automatic equivalent.
Aircraft weight and permitted payload differ between DB1580 and DB2160 configurations. Follow the aircraft-specific limits.
DJI compatibility reference ↗€2,462.05 incl. VAT
€2,001.67 excl. VAT
Add or replace the specified T55 flight-battery family for planned field work.
DB1580 is a separately documented T55 option; it changes aircraft weight and must not be substituted without matching the operating configuration.
DJI compatibility reference ↗€2,223.84 incl. VAT
€1,808.00 excl. VAT
Plan replacement batteries or a field rotation for Agras T50 using its documented battery family.
DB1560 and DB1580 are separate battery families. Match the physical connector and approved charging equipment.
DJI compatibility reference ↗€2,742.90 incl. VAT
€2,230.00 excl. VAT
Support T25 and T25P battery rotation with the model identified in DJI specifications.
DB800 is not FlyCart 30’s DB2000. Charger-family naming alone does not prove battery compatibility.
DJI compatibility reference ↗€1,648.95 incl. VAT
€1,340.61 excl. VAT
Plan a compatible mains-powered charging setup for documented T25/T25P battery configurations.
Select the C8000 configuration for the DB800 battery family and confirm the correct mains and charging leads. Do not substitute the FlyCart 30 DB2000 configuration without checking the approved equipment.
DJI compatibility reference ↗€1,082.40 incl. VAT
€880.00 excl. VAT
Charging station only. AC mains cable excluded; confirm the DB800 charging lead.
Choose a mains-powered charging system for DB1560 operations and separately confirmed newer-battery adapter configurations.
T100 — DJI FAQ confirms DB2160 charging with the required adapter cable.
T70P — DJI FAQ confirms DB2160 charging with the required adapter cable.
DJI explicitly requires an adapter lead for DB2160 with C10000. Fast charging also requires the specified mains/generator wiring arrangement. Do not assume that one domestic socket delivers the maximum rating.
DJI compatibility reference ↗€1,665.42 incl. VAT
€1,354.00 excl. VAT
Select the charging equipment documented for the T55 power system.
Single-phase and three-phase performance are different. Check the battery family, connector and mains installation against the listed specifications before ordering.
DJI compatibility reference ↗€1,195.56 incl. VAT
€972.00 excl. VAT
CSX901-12000: 12 kW on specified three-phase power, 3 kW on specified single-phase power.
T100 · T70P · T100S · T70S · T200
Workflow to confirmT55 — Selection through a documented supported battery family; confirm exact charger revision, adapter and pack.
The specifications below apply to model CSX901-12000. Select the correct charger revision and charging lead for the aircraft and battery. An external generator supplying C12000 must meet DJI’s specified three-phase supply requirements.
DJI compatibility reference ↗€1,702.32 incl. VAT
€1,384.00 excl. VAT
CSX903-18000: 18 kW at 360–510 V AC three-phase; 3 kW at 200–254 V AC single-phase.
The two charging outputs support sequential or parallel charging. Maximum charging power requires the specified three-phase supply; it is not available from every single-phase outlet.
DJI compatibility reference ↗
CCX901-15000: vehicle-supplied 300–500 V DC input, with up to 15 kW output.
This charger requires the documented 300–500 V DC vehicle supply and suitable connection equipment. It is not a standard 12 V vehicle-socket charger. Vehicle and battery connections must be checked before installation.
DJI compatibility reference ↗
Generator charging equipment listed for DB800 field workflows.
Official DJI working-system reference. Aircraft and ancillary equipment are supplied only when itemised.
The listed sale price is for the T25P / DB800 charging configuration only. Match the generator version, charge module and leads to the listed DB800 configuration.
DJI compatibility reference ↗€3,303.87 incl. VAT
€2,686.07 excl. VAT
Included at this price: 1 × D6000i generator in the T25P / DB800 charging configuration. Aircraft and flight batteries are excluded. The priced charging configuration is the DB800 version.
Specify the generator-based charging system documented for T55 operations.
DJI publishes A and B hardware variants with different dimensions, weights and oil capacities. Use the specifications for the delivered hardware version; variant-dependent dimensions, weights and oil capacities remain separate.
DJI compatibility reference ↗€2,572.67 incl. VAT
€2,091.60 excl. VAT
Included at this price: 1 × DJI D8000iE multifunctional inverter generator in the listed Agras charging configuration. Aircraft, flight batteries and other equipment not listed are sold separately.
Specify field charging for the documented T50/DB1560 power-system configuration.
D12000iE and D12000iEP regional revisions must be matched to the required aircraft and battery configuration. Check the regional revision and AC outlet arrangement against your aircraft and battery configuration before ordering.
DJI compatibility reference ↗€5,448.90 incl. VAT
€4,430.00 excl. VAT
Current references list up to 11.5 kW DC charging plus a 1.5 kW AC accessory outlet.
T70P — The international T70P D14000iE configuration is rated at 9,650 W. Confirm the supplied generator revision, battery and charging connection.
Select the generator configuration approved for your aircraft and battery. The 11.5 kW and T70P 9.65 kW reference configurations have different ratings; select the listed 11.5 kW configuration only where it matches your aircraft and battery. This is a fuel-powered charging generator, not an AC mains-input charger.
DJI compatibility reference ↗€5,232.54 incl. VAT
€4,254.10 excl. VAT
Price for the 11.5 kW T100 / FC100 configuration; other revisions are not included at this price.
Configure T100 for granular spreading with the correct hopper, feeder and spreading settings for the selected material.
Official DJI working-system reference. Aircraft and ancillary equipment are supplied only when itemised.
Use the T100 tank and the material-appropriate feeder. The complete T100 and T70P tanks are not interchangeable. Loading must follow the exact aircraft version and the App recommendation for the operating conditions.
DJI compatibility reference ↗€2,421.87 incl. VAT
€1,969.00 excl. VAT
Configure T70P for granular spreading using the correct tank and material-specific feeder.
Official DJI working-system reference. Aircraft and ancillary equipment are supplied only when itemised.
Use the T70P tank and the material-appropriate feeder. The complete tank is not interchangeable with the T100 150 L tank.
DJI compatibility reference ↗€1,456.32 incl. VAT
€1,184.00 excl. VAT
Equip the Agras T55 for controlled distribution of compatible dry granular materials. The tank and feeder belong to the T55 system; the shared appearance of another Agras spreader does not establish fit.
Select the accessory version for the documented aircraft and working configuration. Check the documented aircraft and working configuration before ordering.
DJI compatibility reference ↗€1,293.96 incl. VAT
€1,052.00 excl. VAT
A dedicated granular-spreading assembly for the Agras T50. Use the hopper and spinning-disc configuration appropriate to the actual material, with an application rate set for the field rather than the maximum advertised output.
Official DJI working-system reference. Aircraft and ancillary equipment are supplied only when itemised.
Select the accessory version for the documented aircraft and working configuration. Check the documented aircraft and working configuration before ordering.
DJI compatibility reference ↗€999.99 incl. VAT
€813.00 excl. VAT
Give the T25P a dedicated dry-granule spreading configuration for appropriate seeding, fertiliser and feed applications. The module uses the T25P fittings and feeding system.
Official DJI technical illustration. Equipment shown for installation context is supplied only when itemised.
Select the accessory version for the documented aircraft and working configuration. Check the documented aircraft and working configuration before ordering.
DJI compatibility reference ↗€1,323.48 incl. VAT
€1,076.00 excl. VAT
A T25 spreading accessory for compatible dry granular materials. Select this module for the original T25 platform; the similar T25P name denotes a different spreading system.
Official DJI technical illustration. Equipment shown for installation context is supplied only when itemised.
Select the accessory version for the documented aircraft and working configuration. Check the documented aircraft and working configuration before ordering.
DJI compatibility reference ↗€971.70 incl. VAT
€790.00 excl. VAT
Configure the T100 for suspended agricultural loads using its standard lift system. This fixed-line lifting arrangement is distinct from a powered winch and from the dual-battery lifting assembly.
Official DJI working-system reference. Aircraft and ancillary equipment are supplied only when itemised.
Select the accessory version for the documented aircraft and working configuration. Check the documented aircraft and working configuration before ordering.
DJI compatibility reference ↗€953.25 incl. VAT
€775.00 excl. VAT
A fixed-line lifting configuration for the documented T70P aircraft. It supports suspended-load operations with the aircraft-specific load allowance, rather than turning a spray drone into a general powered-winch platform.
Official DJI working-system reference. Aircraft and ancillary equipment are supplied only when itemised.
Select the accessory version for the documented aircraft and working configuration. Check the documented aircraft and working configuration before ordering.
DJI compatibility reference ↗€613.77 incl. VAT
€499.00 excl. VAT
A dedicated agricultural lifting system used on the documented Agras platforms. Select the aircraft first: the same system family has different load limits on T100S, T70S and T55.
Official DJI working-system reference. Aircraft and ancillary equipment are supplied only when itemised.
T100S · T70S · T55
Select the accessory version for the documented aircraft and working configuration. Check the documented aircraft and working configuration before ordering.
DJI compatibility reference ↗€590.40 incl. VAT
€480.00 excl. VAT
200 kg system rating and a 15 m fixed-length lifting cable.
Official DJI technical illustration. Equipment shown for installation context is supplied only when itemised.
The lifting-system rating is not an unconditional aircraft payload allowance. Aircraft take-off mass, battery mode, altitude and the app’s recommended load remain separate limits.
DJI compatibility reference ↗
A separate dual-battery T100 lifting configuration, rated up to 80 kg on T100.
Official DJI technical illustration. Equipment shown for installation context is supplied only when itemised.
T100 and FlyCart 100 have separate aircraft-specific loading limits. Follow the permitted load for your actual aircraft and battery configuration.
DJI compatibility reference ↗€1,314.87 incl. VAT
€1,069.00 excl. VAT
A T25P-specific additional-sprinkler configuration for jobs requiring the four-sprinkler setup. Order against the T25P aircraft and confirm the complete nozzle, pipe and mounting list.
Select the accessory version for the documented aircraft and working configuration. Check the documented aircraft and working configuration before ordering.
DJI compatibility reference ↗€569.95 incl. VAT
€463.37 excl. VAT
Choose the additional-sprinkler configuration for DJI Agras T25 or T50. Select the exact aircraft so that the correct nozzles, pipework and mounting parts can be specified.
Official DJI working-system reference. Aircraft and ancillary equipment are supplied only when itemised.
Select the kit for your exact aircraft: T25 and T50 require their respective installation configurations. The stated flow is total installed-system flow, not the output of each sprinkler.
DJI compatibility reference ↗T25: €555.55 incl. VAT
€451.67 excl. VAT
T50: €649.85 incl. VAT
€528.33 excl. VAT
Compare the optional mist-sprinkler configurations for T100 and T70P. Both support a four-sprinkler high-flow configuration, but the official technical tables identify different optional nozzle models.
Select the nozzle configuration for the exact aircraft. T100 lists LX09510DX and T70P lists LX09550SX; their four-sprinkler configurations both have a 40 L/min maximum total system flow.
DJI compatibility reference ↗T100: €1,461.24 incl. VAT
€1,188.00 excl. VAT
T70P: €1,096.95 incl. VAT
€891.83 excl. VAT
An optional mist-nozzle package listed in the T100S, T70S and T55 documentation families. Specify the exact aircraft and installation configuration when ordering.
T100S · T70S · T55
Installation must follow the instructions for the exact aircraft. DJI requires authorised-dealer installation and App flow calibration after fitting.
DJI compatibility reference ↗€1,115.61 incl. VAT
€907.00 excl. VAT
An optional spraying-system arrangement for the T100 dual-battery configuration. Match the system with the specified fitting components and the chosen flight-power configuration before ordering. Aircraft, flight batteries and installation are separate unless listed.
Use the LS100-DB arrangement specified for the T100 dual-battery spraying configuration. Confirm the supplied system revision and mounting parts before ordering. The stated 90 kg operating payload remains subject to aircraft and App limits.
DJI compatibility reference ↗€2,879.43 incl. VAT
€2,341.00 excl. VAT
A model-matched agricultural control station for DJI Agras T55, DJI Agras T100, DJI Agras T70P. Select the correct Agras software, firmware and aircraft pairing before supply; physical resemblance to another DJI controller does not establish interchangeability.
Select the accessory version for the documented aircraft and working configuration. Check the documented aircraft and working configuration before ordering.
DJI compatibility reference ↗€1,446.95 incl. VAT
€1,176.38 excl. VAT
Price for the T55 / T100 / T70P agricultural configuration. External battery excluded.
A model-matched agricultural control station for DJI Agras T200. Select the correct Agras software, firmware and aircraft pairing before supply; physical resemblance to another DJI controller does not establish interchangeability.
Official DJI technical illustration. Equipment shown for installation context is supplied only when itemised.
Select the accessory version for the documented aircraft and working configuration. Ask us to confirm the matching equipment before ordering.
DJI compatibility reference ↗
A model-matched agricultural control station for DJI Agras T25P. Select the correct Agras software, firmware and aircraft pairing before supply; physical resemblance to another DJI controller does not establish interchangeability.
Official DJI technical illustration. Equipment shown for installation context is supplied only when itemised.
Select the accessory version for the documented aircraft and working configuration. Ask us to confirm the matching equipment before ordering.
DJI compatibility reference ↗€1,493.21 incl. VAT
€1,213.99 excl. VAT
Included at this price: 1 × DJI RC Plus 2 Agras controller supplied for the T25P configuration. The aircraft model and serial number must be matched before dispatch. Other aircraft profiles, external batteries and charging hubs are excluded.
A model-matched agricultural control station for DJI Agras T50, DJI Agras T25. Select the correct Agras software, firmware and aircraft pairing before supply; physical resemblance to another DJI controller does not establish interchangeability.
Official DJI technical illustration. Equipment shown for installation context is supplied only when itemised.
Select the accessory version for the documented aircraft and working configuration. Check the documented aircraft and working configuration before ordering.
DJI compatibility reference ↗€1,526.22 incl. VAT
€1,240.83 excl. VAT
An agricultural positioning station for supported Agras workflows. It provides correction data for compatible equipment and is a separate product from the enterprise D-RTK 3 Multifunctional Station.
Use D-RTK 3 AG with the supported Agras firmware and positioning workflow. This agricultural station does not support the relay mode of the D-RTK 3 Multifunctional Station.
DJI compatibility reference ↗€998.88 incl. VAT
€812.10 excl. VAT
A dedicated video/control-link relay for supported agricultural aircraft, used when site conditions obstruct the direct link. It is separate from the D-RTK positioning station and does not remove operational authorisation or visibility requirements.
Fit the antennas and mount the relay in an unobstructed position using the matching Agras firmware. The extension rod is supplied separately. Positioning-station and older relay accessories are different products.
DJI compatibility reference ↗€1,146.68 incl. VAT
€932.26 excl. VAT
GNSS correction reference for the documented aircraft and station workflow.
Select the accessory version for the documented aircraft and working configuration. Check the documented aircraft and working configuration before ordering.
DJI compatibility reference ↗€3,334.53 incl. VAT
€2,711.00 excl. VAT
An optional controller-positioning accessory for supported Agras RC Plus workflows, used when marking points or field boundaries. It is not a replacement for the aircraft’s RTK receiver or a universal fitting for every RC Plus 2 controller.
Official DJI technical illustration. Equipment shown for installation context is supplied only when itemised.
Fit the RC Plus-specific adapter to the controller’s USB-A interface and secure it as instructed, then fit the RTK positioning module. This enables the supported controller point-marking workflow; it does not replace the aircraft’s positioning receiver.
DJI compatibility reference ↗€205.00 incl. VAT
€166.67 excl. VAT
