Description
Overview
Designed for Matrice 400, it connects through an E1 or E2 port on E-Port V2. Payload limits apply to each mounting position. Aircraft and gimbal payloads are supplied separately.
Using this accessory
The Dual Gimbal Connector provides mounting positions beneath the nose of Matrice 400 for supported gimbal payloads. It connects through an E1 or E2 port on E-Port V2.
Choose the correct configuration
Confirm that the chosen payloads and mounting arrangement are supported, and observe the limit for each gimbal position. Aircraft and payloads are supplied separately. A dual mounting connector does not make an unsupported sensor compatible.
Key features
- Two downward gimbal mounting positions beneath Matrice 400.
- E1 or E2 connection on E-Port V2.
- Payload selection remains subject to the per-position limit.
Compatibility
Compatible with DJI Matrice 400 through an E1 or E2 port on E-Port V2.
- Aircraft and gimbal payloads are not included.
- The payload limit is per mounting position.
- Waterproof performance depends on the attached payload.
Specifications
| Manufacturer model | M400 DGC |
|---|---|
| Interface | E1 or E2 port on E-Port V2 |
| Mounting configuration | Two downward gimbal positions beneath the aircraft nose |
| Maximum payload per gimbal position | 950 g |
| Dimensions | 158 × 320 × 115 mm |
| Weight | 231 g |
| Manufacturer part number | CP.EN.00000671.01 |
In the box
- Dual Gimbal Connector × 1
Supplied separately
- Gimbal payloads
- Aircraft
Setup and use
- Power the aircraft off before fitting the connector.
- Use the E-Port V2 connection and mounting arrangement specified by DJI.
- Confirm the chosen payloads and loading limits before operation.
Official manuals and setup guidance
Common questions
Are the two cameras shown in the installed image included?
No. The connector, aircraft and gimbal payloads are separate products.
Does the connector authorise any pair of sensors?
No. The aircraft, connector, payload compatibility and per-position limits all apply.
Explore compatible equipment
Check the compatibility notes above when selecting a complete setup. Equipment linked below is supplied separately unless included in the box contents.
- DJI Matrice 400 | Long-Endurance Enterprise Drone Platform
- DJI Zenmuse H30T Thermal Payload | Multi-Sensor Drone Camera
- DJI Zenmuse P1 | Full-Frame Photogrammetry Camera for Surveying
Reviews
There are no reviews yet.