Description
3MP luminescence imaging for day and night PV inspections
The EP-DU-300 is a PV luminescence inspection system for solar farms and modules. With a 3MP resolution and 39.1°×29.8° field of view, it supports image capture during both day and night. It supports live image preview, GPS/BeiDou coordinate recording, and adjustable camera parameters. The system is compatible with DJI M350 and M400 drones and features an English user interface option.
Included inspection system
The advertised price includes the EP-DU-300 camera system and the compatible PV control box required for the agreed project. The module-level or string-level control-box arrangement is checked against your site before dispatch. Aircraft and flight batteries are separate.
Where this payload fits
PV Solar-Farm Luminescence Inspection
Acquire PV luminescence imagery in the supported day or night mode, using the manufacturer-approved system configuration and inspection method.
Incoming Module Quality Checks
Support incoming-module quality review with luminescence imagery, interpreted against the relevant inspection method and acceptance criteria.
Post-Installation Module Inspection
Document visible luminescence anomalies after installation and support a qualified inspection team in deciding what follow-up checks are needed.
Technical specifications
| Inspection method | Airborne photovoltaic luminescence inspection |
|---|---|
| Operating window | Day / night |
| Image pixel count | 3MP |
| Field of view | 39.1° × 29.8° |
| Manufacturer-listed dimensions | 106 × 80 × 76mm |
| Image output | JPEG |
| Position recording | GPS / BeiDou coordinates with inspection imagery; verify settings |
| Preview | Live image preview |
| Aircraft named by manufacturer | DJI M350 / Matrice 400 |
| Manufacturer mass figure | Less than 1kg; confirm scope of complete installed system |
| Working temperature | −10 to 50°C |
| Interface language | English option stated; confirm supplied firmware |
| System configuration | Camera system with compatible project control box included; confirm aircraft interface and site-specific electrical preparation |
Plan the complete inspection system: EL/PL luminescence capture uses a manufacturer-defined inspection method. Confirm module/string preparation, any required EP-CB-M or EP-CB-S control box, qualified personnel and the supplied system configuration. This camera is not a radiometric thermal-temperature payload. Day/night capability does not establish rain tolerance or an IP rating.
Capture and processing workflow
- Confirm the exact aircraft, adapter, firmware and control-box configuration for the delivered system.
- Arrange the manufacturer-approved inspection method, module/string electrical preparation, site permissions and qualified personnel.
- Check the required daylight/nighttime mode and camera settings; confirm the English interface and coordinate-recording configuration where required.
- Acquire and review live imagery under the applicable operating procedure; do not treat these outline steps as a complete electrical-safety method.
- Check saved JPEG images and coordinate metadata, then use the agreed inspection and analysis workflow.
Software and data review
Confirm the supplied image-review software, firmware and English-interface option. Check coordinate-recording settings and saved metadata during setup; positioning tags support defect follow-up but do not independently establish mapping accuracy.
Software names describe the manufacturer-associated workflow. Included licences, seat counts, licence term and supplied calibration equipment must be confirmed for your configuration.
Matrice 400 integration and selection
The EP-DU-300 is compatible with DJI M350 and M400 drones. Confirm gimbal adapter, firmware, and connectivity with the manufacturer before deployment.
Verify that the EP-DU-300 is a PV luminescence system, not a thermal camera. Ensure it is the day/night model and not the nighttime-only version. Confirm compatibility with your drone and that all electrical and operational procedures are manufacturer-approved.
The compatible project control box is included in the advertised system price. Aircraft and flight batteries are separate. Confirm the required aircraft adapter, supplied software and project accessories before ordering; the manufacturer’s platform statement is not a claim of DJI certification.
Product questions
Can the EP-DU-300 be used during the day and night?
Yes, the EP-DU-300 is a day/night testing class system and can be used in both lighting conditions.
What image format does the EP-DU-300 output?
The system outputs JPEG images with GPS/BeiDou coordinates recorded for each image.
Is the user interface available in English?
Yes, the manufacturer states an English user-interface option is available; confirm the firmware is set to English.
What drones is the EP-DU-300 compatible with?
The manufacturer explicitly names DJI M350 and M400 as compatible drones.
Compare the M400 payload range
FIGSPEC FS-500L Multispectral + RGB Payload — Four spectral bands and RGB for vegetation mapping
FIGSPEC FS-50/30L Hyperspectral Payload — 30 spectral channels for airborne research and classification
FIGSPEC EP-NU-1200 Nighttime PV Inspection Payload — 12MP luminescence imaging for nighttime PV inspections
Discuss your application with Irish Drone
Tell us your aircraft, PV installation and inspection requirements so we can confirm compatibility, the included control-box arrangement and a suitable deployment plan.
Reviews
There are no reviews yet.