Description
Overview
The DJI Dock 3 Vehicle-Mounted Gimbal Mount helps hold the Matrice 4D or Matrice 4TD aircraft and gimbal in place within the dock during vehicle transport. It uses left and right mounting pieces and a gimbal support. Install it using the screw and cable arrangement specified by DJI. A reminder sticker is included. The dock and aircraft are supplied separately; this is not a complete vehicle-roof mounting system.
Using this accessory
The Vehicle-Mounted Gimbal Mount restrains the aircraft and its gimbal inside DJI Dock 3 during vehicle transport. It is used with Matrice 4D or Matrice 4TD in a correctly installed Dock 3 vehicle deployment.
Choose the correct configuration
The dock, aircraft and vehicle mounting platform are supplied separately. Follow DJI’s bracket orientation, cable-routing and fastening instructions, and keep the vehicle and dock stationary during aircraft operation.
Key features
- Restrains the aircraft and its gimbal inside Dock 3 during vehicle transport.
- For Matrice 4D or Matrice 4TD operating with a correctly installed DJI Dock 3 vehicle deployment.
- This accessory is not the vehicle-roof or load-bed mounting platform and does not include a dock, aircraft or vehicle installation.
Compatibility
DJI Dock 3 vehicle-mounted deployment with Matrice 4D or Matrice 4TD
- Provides aircraft and gimbal restraint inside the dock during vehicle transport.
- Power off the dock before installation or cable connection. Follow the specified screw arrangement and cable routing.
Specifications
| Right bracket and gimbal support weight | 440 g |
|---|---|
| Left bracket weight | 155 g |
| Right bracket and gimbal support dimensions | 112.8 × 152.2 × 157.8 mm |
| Left bracket dimensions | 126.3 × 172.9 × 70.3 mm |
| Power supply voltage | 14 V |
| Ingress protection | IP55 |
| Operating temperature | −30 to 50°C |
| Manufacturer part number | CP.EN.00000638.01 |
In the box
- Right bracket and gimbal support × 1
- Left bracket × 1
- Reminder sticker × Included according to Product Information
Check the required fasteners and cable routing against the DJI installation instructions before fitting.
Supplied separately
- DJI Dock 3
- Aircraft
- Vehicle-roof mounting platform
- Vehicle installation service
The official installation diagram shows the mounting arrangement. DJI Dock, the aircraft and vehicle are not included.
Setup and use
- Power off the dock before installation or cable connection.
- Fit the right and left bracket assemblies in the orientation shown by DJI; route the signal cable and use the specified screw arrangement.
- Remove tools from the landing pad, check the pad is clear and attach the supplied reminder sticker to the vehicle control panel.
- Before flight, park within the slope limit stated by DJI, perform cloud dock-location calibration and keep the vehicle and dock stationary throughout aircraft operation.
Official manuals and setup guidance
Official DJI vehicle-deployment demonstrations
These demonstrations show complete Dock 3 systems. The dock, aircraft, vehicle and roof platform are supplied separately from this gimbal mount.
Cloud-Based Dock Location Calibration
Safe Dual-Dock Deployment
Common questions
Is the aircraft or main system included?
Only the accessory contents listed in the verified In the box section are supplied. Aircraft, controllers, stations and power equipment shown in application images are separate unless explicitly itemised.
How do I choose the correct version?
Provides aircraft and gimbal restraint inside the dock during vehicle transport.
Explore compatible equipment
Check the compatibility notes above when selecting a complete setup. Equipment linked below is supplied separately unless included in the box contents.
- DJI Dock 3 | Automated Drone Dock for Matrice 4D&4TD
- DJI Matrice 4D Drone – Enterprise Industrial Drone for Mapping, Inspection & Surveying
- DJI Matrice 4TD Drone – Enterprise Thermal Drone for Inspection, Public Safety & Night Operations
Reviews
There are no reviews yet.